I bought a Honda Ridgeline. This project was inspired by many other DIY wooden snow plow (back hitch) projects on Internet, so I decided to make one myself using 3/4″ plywood, 2×4, 2×6, 4×4 and other basic materials found in local hardware store. Taking advantage of the 2″ back hitch of my 2017 Honda Ridgeline, this project has been pretty fun. I have added some annotation to the photos, it is pretty self explanatory.

 
Check out the video on my YouTube channel and Remember to subscribe!

Comments

  1. Too time consuming and fiscally frivolous to fabricate. One could be fabricated for a fraction of the aforementioned expense and in one fifth the time.

    1. It wasn’t that time consuming, it was fun. I just DIY it during my spare time. BTW, it’s pretty cheap already…. total parts was around $250 US. If you can build one in 1/5 of the time and being more effective, I will buy it from you for $250 US. okay?

Leave a Reply to Joseph Cancel reply

Your email address will not be published. Required fields are marked *