After reading my previous article “How to install Toilet flange extension when screws are not aligned?“, next I am going to show you how to install Kohler Santa Rosa and Kohler Bidet C3-125 like a Pro. Yes, guarantee no leak. Any DIY people should be able to do it successfully. The prerequisite for leak free toilet…
After reading my previous article “How to cut floor tiles for toilet flange and air duct?“, the next problem you may face is installing the toilet flange extension. There are couple of products on the market at Home Depot and Canadian Tire, however you may run into the problem of existing screws not aligned with…
After reading my previous article “Tile Question: Can you reuse the existing mortar bed on plywood?“, the next question is: How to DIY cut floor tiles for toilet flange and air duct? I am going to cut the tiles for the toilet flange. Here is a simple DIY tips, use a piece of masking tape…
After reading my previous article “How to remove tiles and thinset using a homemade tool?“, the next question is: Can you reuse the existing mortar bed? The answer is YES. To do this, you need an angle grinder and there is an additional tool you want to invest. It is a dust extraction tool which…
To remove the tiles like a Pro, I am making a Tile Removal Tool myself. I got a blade for the floor scraper from my local hardware store and I am trying to attach it to the air chisel that came with my air compressor. For this homemade tool, you do need to have a…
This DIY project wasn’t that difficult compare to other projects I did in the past, the result is pretty impressive if you compare the before and after photos. I want to share this information with other people who want to DIY their powder room. The Makeover My wife was the one who decided what sink…
Water condensation is always a problem in extremely cold weather in Canada, despite experts always tell you to lower the humidity when temperature drops below 0C but in our master bathroom, that does NOT help at all when it’s -20C outside. These 2 DIY projects are to solve the problem: (1) Nutune Fan QTN110E (110…
Edited: Not to be confused with the new posts, this DIY project was done in our old house many years ago back in 2012. We were walking at Home Depot after dinner and spotted there was a Sonata 24″ Vanity laying around (made by Canadian company, Magick Woods). We talked to the service desk and…
The builder gave us some ugly ceramic towel bar and toilet paper holder, we decided to remove them and get the chrome one. It is interesting that I couldn’t find a lot DIY information on this topic, so I decided to write one up to help other people. How to remove the ceramic towel bar…